Arlen Ness Handlebars
Each design is available for the following applications:
| 1.25" | With built-in risers: Features 1-1/4" fat look tubing with 1" long built-in risers. These bars bolt directly to your top triple tree and are drilled for internal wiring. | 1" | With built-in risers: Features 1" tubing with 1" long built-in risers. These bars bolt directly to your top triple tree and are drilled for internal wiring. | 1.25" | For 1-1/4" clamps: These bars are designed exclusively for Ness-Tech 1-1/4" riser assemblies and are drilled for internal wiring. Will not work with factory style handlebar clamp assemblies. | 1.25" | For factory 1" clamps: These bars are designed to work with 1" factory handlebar clamp assemblies (except FXSTS and FLSTS). They are pre-drilled for internal wiring. | 1" | With indents: These bars can be used on most 1982-up applications. | 1" | With indents: Without indents: These bars can be used on most universal applications. | 1.25" | FXSTS, FLSTS: These bars fit exclusively factory Springer models. They are pre-drilled for internal wiring. |
 |
 |
|
08-041, 08-045 click for larger version |
08-026 click for larger version |
|
 |
 |
|
08-024 click for larger version |
08-016 click for larger version |
|
 |
 |
|
08-046, 08-044, 08-059 click for larger version |
08-042, 08-058 click for larger version |
ATTENTION :
These pages are not designed for general usage as it is fed by a database and may include out-dated information.